Industrial Tools

Tramontina PRO Capacity 150 mm - 6'' vernier caliper

Code 44540004

The Vernier calipers are a high precision instrument used to measure different kinds of surfaces. With easy reading due to the 15° angle Vernier inclination, it has 4 measuring options such as internal, external, rebound, and depth. It has a hardened stainless steel body, tempered measuring faces, monoblock cursor with a fixation screw, as well as a millimeter and inch scale on the body. Ideal for professionals who refuse to compromise precision and quality.

Product features

Main Functions and Benefits Hardened stainless steel body.
Measuring faces lapped with special tempering.
Monoblock cursor with fixation screw.
Millimeters and inches scale marked on body.
Resolution: 0,02 mm - 0,001''.
Accuracy: 0,02 mm.
DIN 862.
It allows 4 measuring ways: external, internal, rebound and depths.
Easy reading due to the 15° angle vernier inclination.
High precision instrument, used when it's necessary to measure different kinds of surfaces.
The instruments are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Always keep the tool clean for a better gripping and measuring process.
In order to avoid damage to the instrument, never exceed the scale limits.
Never disassemble or modify any part of the instrument. Such procedure must be done only by Tramontina.
Do not expose the measuring tolos to excessive heat and direct sunlight.
Never leave the measuring faces completely clasped. It is recommended that they are kept slightly apart, at 0.2 to 1 mm.
After using the instrument, store it in the original box or safe place.
Avoid drops or impacts to the instrument. It can cause damage to the instrument and uncertainty in the measurement.
Clean measurament faces and moving parts of tools before and after measuring. The presence of abrasive particles can cause premature wear to the tool.
Avoid damaging measurement faces. Also avoid using the measurement faces of calipers as a drafting compass.
Whenever posible, grase the measuring tools when storing them for a long period of time. Use a cloth with thin oil to protect from rust.
Store in a clean and dry place.
Weight 0,15 kg
Warranty Full warranty against manufacturing defects.
  • A: 77.0 mm
  • B: 230.0 mm
  • C: 16.0 mm