Industrial Tools

Torque angle indicator - Capacity: 0-300º Nm

Code 44510101

Tool used to tighten a screw or nut when an angular torque is required. More resistance, comfort, and safety in your hands.

Product features

Main Functions and Benefits Forged chrome vanadium steel socket.
Carbon steel body.
Phosphated socket.
Chrome plated body.
Graduated reading from 0º to 360°.
Resolution of 2°.
Fixation screw for the rotation disk.
Magnet end for fixation on metallic surfaces.
Tool used to tighten a bolt with an established angular torque.
It is used with 1/2" square drive accessories (ratchet, T handle, L handle, Flex handle, etc.) and sockets.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
In order to avoid damage to the torque wrench, never exceed the scale limits.
Do not use pipes or other extensive bars to obtain more torque, it can damage the tools.
Turn the torque back to the lowest value on the scale when the torque wrench is not being used. Any unnecessary stress could damage the internal mechanism (spring) of your torque wrench.
If the wrench has not been used for a long period of time (more than a month), use it 5 to 10 times, with 75% of maximum torque capacity. This procedure provides lubrication to the internal components.
Never disassemble or modify any part of the torque wrench. Such procedure must be done only by Tramontina.
It's recommended that you calibrate the torque wrench after 6 months or 5.000 operation cycles (whatever is reached first), after drop or impacts, excessive stress or when there is any doubt on the applied torque.
After using the torque wrench, store in its original box or safe place.
Weight 0,50 kg
  • A: 20.0 mm
  • B: 80.0 mm
  • C: 60.0 mm
  • D: 12.9 mm
  • E: 12.7 mm
  • F: 420.0 mm
  • G: 495.0 mm