10" Fence Pliers

Code 41013110

Used to assemble, disassemble, and carry out routine maintenance on wire fences, the fence pliers were designed to drive nails and remove pins in addition to twisting, cutting, and pulling wires. Your toolbox isn't
complete without this product!

Product features

Main Functions and Benefits Forged and hardened special steel body. The special carbon steel used in the product allied with the special hardening guarantee a higher resistance.
Polished head.
Special hardening at the cutting edge and jaws.
Handles with special coating.
Soft opening in order to make the job easier.
Due to its special shape, its a versatile tool. It can be used to introduce or remove clamps, fold, cut, turn or press wires.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and other safety equipments according to the job.
Always use the correct type of pliers or pincers for the job. Never use pliers or pincers to cut hardened wires, unless they are designed for this purpose.
Never use pliers or pincers as a hammer. It can crack or even break.
Never expose pliers or pincer to excessive heat. It can change the heat treatment applied at the cutting edges and reduce the performance of the tools.
Always ensure that the pliers or pincers are perpendicular to the wire for a quicker and safer operation.
Use isulated pliers identified on the grip with the marking 1.000 V when is necessary to work in places with electricity. Important: inspect the electrical insulation on a regular basis, if the insulated grip becomes cracked, you must stop using the pliers immediately.
Never increase the length of the pliers or pincers handles. It increases the load applied on the tool and can break it.
Never use the pliers or pincers on nuts or screws. For this kind of job it's better to use a wrench or spanner.
Oil the joint occasionally as this will extend the life of the tools and improve their use.
Store in a clean and dry place.
Weight 0,67 kg
Warranty Full warranty against manufacturing defects.
  • A: 88.0 mm
  • B: 275.0 mm
  • C: 59.0 mm
  • D: 15.0 mm
  • E: 18.0 mm