Industrial Tools

300 g Machinist's hammer with polypropylene fiber handle reinforced with steel core

Code 40730205

Suitable for riveting, forming and straightening metal, in addition to striking knives, punches, pins, spouts, among others, the Tramontina PRO feather hammer has steel core with polypropylene coated steel, reinforced with glass fiber and fixed with resin Epoxy and elastic pin, which guarantees safety in use. Undergoing the most rigorous quality tests, which ensure the use in continuous use, the hammer also has PVC and rubber grip for comfort. All the quality and safety you need to hit the hammer.

Product features

Main Functions and Benefits Forged special steel head.
Hardened at the striking face and pein.
Polished and varnished base and pein.
Steel core handle coated with polypropylene and fiber.
Injected grip.
Head fixed by epoxy and elastic pin.
DIN 1041.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product.
In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed.
Striking punches and pins, and to rivet, form or straighten non-hardened materials.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Always strike the hammer perpendicularly to the surface or work tool. It avoids the premature distortion of the impact face, as well as chipping.
Select the hammer that will hit the chisel or pin as follows: The impact face shall have a diameter 10 mm bigger than the face to hit.
Store in clean and dry place.
Weight 0,52 kg
Dimensions
  • A: 105.0 mm
  • B: 300.0 mm
  • C: 23.0 mm