Hardwood handle 5.000 g shot blasted engineer's hammer

Code 40508010

Tearing down a wall can be very difficult without the Tramontina engineer's hammer. Resistant and safe, it's the right tool for everything from civil construction to small repairs.

Product features

Main Functions and Benefits The head is forged and hardened with special steel assuring great resistance to the product.
Perfect balance between head and handle to increase comfort and safety.
The fixing system by steel wedges helps to increase the safety.
Shot blasted and varnished head.
The stoning hammers are subjected to a specific hardening process to give a suitable hardness at the striking face to ensure a long life.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never strike steel hammers and slegde hammers against surfaces with hardness higher than 45 HRC. Such procedure can cause chips or cracks that could injure the user.
Never modify tools original features (changing of handle, grinding of head, etc.).
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Store in clean and dry place.
Weight 5,40 kg
Dimensions
  • A: 175.0 mm
  • B: 900.0 mm
  • C: 63.0 mm
  • D: 61.0 mm