Industrial Tools

300 g hardwood handle welder's hammer

Code 40455000

Made for removing welding slag. All the quality and safety that you need when hammering.

Product features

Main Functions and Benefits Forged and hardened special steel head.
Sand blasted and varnished head.
Hardwood handle fixed with steel wedge.
Perfect balance between head and handle to increase comfort and safety.
The fixing system by epoxy resin or steel wedges helps to increase the safety.
The hammers' head is protected against rust with varnish or electrostatic painting.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw/pein to ensure a long life.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Always strike the hammer perpendicularly to the surface or work tool. It avoids the premature distortion of the impact face, as well as chipping.
Select the hammer that will hit the chisel or pin as follows: The impact face shall have a diameter 10 mm bigger than the face to hit.
Store in clean and dry place.
Weight 0,44 kg
Warranty Full warranty against manufacturing defects.
Dimensions
  • A: 177.0 mm
  • B: 280.0 mm
  • C: 21.0 mm