25 mm claw hammer engineering polymer handle

Code 40376025

Tramontina Master's claw hammer with an engineering polymer handle was designed to insert and remove nails, and to tear and remove structural wooden components in the civil construction segment. It is 40% more resistant than the traditional model with a eucalyptus wood handle, and it is recyclable. The high quality you need for you to slam the hammer down!

Product features

Main Functions and Benefits Forged and hardened special steel head.
Shot blasted and varnished head.
High resistance handle in engineering polymer.
Fixed with epoxy resin.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never strike steel hammers and slegde hammers against surfaces with hardness higher than 45 HRC. Such procedure can cause chips or cracks that could injure the user.
Never modify tools original features (changing of handle, grinding of head, etc.).
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Store in clean and dry place.
Weight 0,58 kg
Warranty Full warranty against manufacturing defects.