29 mm polished wood handle claw hammer

Code 40200029

All construction jobs need a claw hammer to drive and remove nails and rip and remove structural components of wood. It's the right tool for everything from civil construction to small repairs.

Product features

Main Functions and Benefits Forged and hardened special steel head assuring great resistance to the product.
Polished and varnished head.
Hardwood handle fixed with epoxy.
Perfect balance between head and handle to increase comfort and safety.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking face and claw to ensure a long life.
Recommendations for Use Wear safety glasses, gloves and other safety equipment according to the job.
Never strike steel hammers and slegde hammers against surfaces with hardness higher than 45 HRC. Such procedure can cause chips or cracks that could injure the user.
Never modify tools original features (changing of handle, grinding of head, etc.).
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Store in clean and dry place.
Weight 0,85 kg
  • A: 127.0 mm
  • B: 355.0 mm
  • C: 29.0 mm
  • D: 37.0 mm